Storm & Wind Damage Repair
Gusts funneled through the Narrows lift shingles and ridge caps.
DetailsKitsap County starts past Gig Harbor, on the far side of the Narrows. Our coverage there is the south end, closest to the bridge.

Short answer
Yes, we work in Kitsap County, but only the south end closest to the Tacoma Narrows bridge. The county counted 275,611 people in 2020, and the stretch we reach takes wind off the Narrows. In the December 2018 windstorm, the Weather Service logged 52 mph at Tacoma Narrows Airport, just across the water from the Kitsap line.
We reach Kitsap County by crossing the Tacoma Narrows bridge. Gig Harbor, the first town on the far side, is actually in Pierce County, and Kitsap County begins past it. Our coverage is the south end of Kitsap closest to the bridge. We do not cover the whole peninsula, and we will say so if your address is too far north.
None of our city pages sit inside Kitsap County. The nearest are Gig Harbor and University Place on the Pierce County side. Permit rules in Kitsap come from Kitsap County or the city your address falls in, so we confirm with the right office before any reroof.
The Narrows funnels wind between the peninsula and the mainland. In the December 20, 2018 windstorm, the Weather Service logged 52 mph at Tacoma Narrows Airport, 51 mph at JBLM and 43 mph in Fircrest. Roofs on the Kitsap side of that corridor take the same kind of gusts.
Wind damage starts at the edges: rake shingles, ridge caps, and tabs whose seal strip has let go. Tall firs around many homes add limb strikes and needle-packed gutters. After a storm, we photograph damage, tarp anything open, then replace lifted shingles and hand-seal the exposed edges. Our windstorm guide covers what you can check from the ground.

Much of south Kitsap is wooded, and roofs under heavy canopy stay damp long after the rain stops. Moss grows on shaded slopes, needles fill valleys and gutters, and the debris holds water against the shingles. We remove moss by hand, clear valleys and talk through gutter guards that hold up under fir.
When a roof under trees is at the end of its life, we strip it, check the deck for soft spots around valleys and eaves, and rebuild with ice barrier where debris and runoff collect.
Gusts funneled through the Narrows lift shingles and ridge caps.
DetailsLimb strikes and torn sections need a cover before the next storm.
DetailsShaded roofs under heavy canopy grow thick moss on north slopes.
DetailsFir needles pack gutters and valleys under wooded lots.
DetailsWorn roofs under trees get a tear-off with the deck checked at valleys and eaves.
DetailsWind-driven rain finds wall junctions and vents that face the water.
DetailsNo. We cover the south end closest to the Tacoma Narrows bridge. Give us your address and we will tell you honestly whether it is in range.
No, Gig Harbor is in Pierce County. It has its own area page, and Kitsap starts past it.
In the December 2018 windstorm, the Weather Service logged 52 mph at Tacoma Narrows Airport, just across the water.
Kitsap County or the city your address is in. We confirm with the right office before tear-off.
Yes. We cover the hole and repair the roof once the tree is off. See our storm damage page.
Or see the full South Sound coverage overview.
Call any hour. Give us your address first and we will tell you whether it is in our south Kitsap range.
Calls are answered around the clock. Tell us what you are seeing and where the house is, and we will set up a visit.
Our office sits in Puyallup, and our crews work across Tacoma and Pierce County. The map loads only when you ask for it.